Oregon ControlCut Replacement Chainsaw Chain

The Oregon ControlCut is a replacement chainsaw chain with a MICRO-CHISEL design, 66 drive links and a 0.050" (1.3mm) gauge. It is recommended for saws from 38cc to 58cc and guide bars from 11" to 20" (28 to 50cm).

Bumper drive links reduce kickback. The Vibe-Ban chassis design reduces vibration by 25% or more at the handles. Lubrilink tie straps help keep oil on the chain, while Lubriwell oil holes in all drive links help carry oil around the full length of the guide bar groove. A top plate witness mark makes accurate sharpening easier.

Listed fitments with 40cm (16-inch) bars are Husqvarna 33, 36, 41, 355XPT, 333, 334, 338, 1400, 1600, 315, 316, 317EL, 318, 32 and 321EL; Einhell 40A, 41, MSS30 and MKS40AV; and Oleo-Mac 233, 234, 244, 240, 335, 930, 935DX, 936, 940, E140F, E160F, E1500, E1700, E1900, 931, 932 and 938.

Chain length is determined by counting the drive links. The drive-link count corresponds to bar length, and bars from different producers may require different counts. Count the links on the existing chain; on an Oregon chain in an Oregon box, the count is stamped on the box flap.